Dent repair on bonnet

Looking for help with a mechanical problem? This is the place to find help!
Post Reply
Miltonian
Posts: 108
Joined: Sun Oct 24, 2010 8:30 pm
Location: Milton, Wa.

Re: Dent repair on bonnet

Post by Miltonian » Sat Oct 07, 2017 12:38 pm

Are you familiar with "stud welders"? With one of these, you spot weld a series of small pins onto the surface of the metal surrounding the dent, then pull out the dent using a slide hammer, snip off the pins, then grind smooth and refinish/repaint. No holes to drill. May be available from a good rental shop? Seems like there should be a "how-to" video on the internet, I haven't looked.
Jeff B.
1958 600 Multipla
1959 600 Sedan

Post Reply